29
1200 Series SmartPanels 1.1 User Manual
0
1
-0
0
0
H
B
0
3
E
G
-B
0
0
Common Signalization
Signal
Display
Description
Call
(incoming)
The Key-display is highlighted (fade in / out) while a
call is incoming if the port is not muted.
Beep
(incoming)
The animated bell icon shows where the Beep being
received is coming from.
Beep
(outgoing)
The animated bell shows that the user is beeping a
remote panel.
Port occupied
This symbol indicates that the remote panel is
currently in a call.
Active Control Signal
This signal will cover all control functions in the Artist.
The user can choose to color the control signal in the
key function.
5.2.3
Lever-Groups
The keys of the SmartPanel can be assigned into up to 16 groups.
For an easy identification each group has an separate group color.
The group color can be selected in
Key Properties
in the Director software: right-click on the respective key
>
Properties
> '
General
' tab > '
Group color
'.
The group color is indicated either in the key ring or in the display of the SmartPanel.
This setting is done in
Panel Properties
in the Director software: right-click on the respective SmartPanel >
Properties
> '
UI Config
' tab > '
Group color
'.
figure 33: group color per key in Director (Key
Properties)
figure 34: indication of group color in Director (Panel
Properties)
The key signalization is indicated in the opposite way:
·
If the group color is indicated via the key ring, the signalization is indicated via the display.
·
If the group color is indicated via the display, the signalization is indicated via the key ring.
Group Color via Key Ring
Group Color via Display
Group-Color
(i.e. light blue)
Signalization
via the key ring
(only in Talk/Listen mode)
Signalization (Bars)
via the display
(only in Talk/Listen mode)
Group-Color
(i.e. light blue)
In Talk/Mute mode, signaling is always shown via icons in the key display.
DRAFT
05.10.2020
