Cleaning, Maintenance and Care
Rieber GmbH & Co. KG
45
# Clean cooling pellets
→ Applies to types
TWF-C 3.0-PK
Mild
washing up detergent diluted in hot water is ideal for cleaning. Afterwards,
rinse with clear water. After cleaning, rub surfaces dry with a
soft cloth
.
NOTE
The cooling pellet can be washed in the dishwasher up to ≤ +85 °C.
# Clean door seal
→ Applies to types
TWF-AK
(… with cooling device, active convection cooling)
The door seal is removable.
NOTE
Door seal may not be cleaned with oven spray. The oven spray can destroy the door
seal.
Mild
washing up detergent diluted in
hot
water is ideal for cleaning. After cleaning,
rub surfaces dry with a
soft cloth
.
# Clean wheels
NOTE
Incorrect cleaning can damage the casters.
A high-pressure cleaner can be used for types TWF-H
-
AWT.
For other types:
Clean the casters
with a
hot
,
mild detergent diluted in water. After cleaning, rub
surfaces dry with a
soft cloth
.
# Clean controller operating panel
→ Applies to types TWF-AK (… with cooling device, active convection cooling)
Clean the controller operating panel with a soft, damp (not wet) cloth. Then rub dry
with a soft cloth.
# Keep ready for next use in dry condition
Dry the inside of the appliance and leave the door open until the residual moisture
has dried off.
Store appliance at room temperature.