![Rieber navioven Operating Instructions Manual Download Page 45](http://html.mh-extra.com/html/rieber/navioven/navioven_operating-instructions-manual_1459151045.webp)
Cleaning, maintenance and care
Rieber GmbH & Co. KG
45
8.7
Descale the appliance as required
User tip
Signs of calcification are visible limescale and extended processing time, increased noise
generation, intense steam generation.
►
Descale the appliance before a thorough cleaning;
at least
once a month
for intensive use,
at least
once every 3 months
depending on use.
WARNING
Use a commercially available descaler for domestic appliances. Observe the
manufacturer's instructions.
Prepare the
descaling solution
with
0.5 litres of
drinking water and the quantity of
descaler specified by the manufacturer. Pour these in.
Place an empty GN container on the lowest support rail in the appliance.
Turn the
dial
to the
POWER
setting.
▌
The corresponding LED lights up.
Press the
Humidification button
continuously, until you hear the water pump switch
on.
Wait until the water pump switches off again and leave the descaling solution to work in
accordance with the manufacturer's instructions, around 10 minutes.
Then press the
Humidification button
continuously, until you hear the water pump
switch on and the descaling liquid is pumped out.