14 – English
TROUBLESHOOTING
ILLUSTRATIONS START ON PAGE 15
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Tool does nothing or
operates sluggishly
Inadequate air pressure supply
Worn or damaged O-ring seals or bumper
Exposure to low temperatures
Exposure to high temperatures
Verify adequate air supply. Add air
to the tool through the air fill valve.
Contact authorized service center
for repair.
Allow tool to warm to proper operat-
ing temperature.
Allow tool to cool to proper operating
temperature.
Tool jams frequently
Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
Verify that fasteners are the correct
size.
Replace fasteners.
Tighten screws.
Clean magazine.
Contact authorized service center
for repair.
LED LIGHT FUNCTIONS
TOOL STATUS
LED LIGHT SCENARIO
ACTION REQUIRED
Normal
Solid Green Light (No Flashes)
No Action Needed
Low Battery
Solid Red Light (No Flashes)
Recharge or Replace Battery. If problem
persists, contact an authorized service
center for repair.
Jam Mode
Flashing Red Light
Clear Jam – See
Clearing a Jammed
Fastener
in
Operations
.
This product has a 90-Day Satisfaction Guarantee Policy,
as well as a Three-year Limited Warranty.
For Warranty and Policy details, please go to powertools.ridgid.com
or call (toll free) 1-866-539-1710.
