Ridder NoNa+, Installation And User Manual

Page: 9 / 72

2 Product information
This section describes the components and the functioning of the NoNa
+
.
2.1 Principles of operation
Each NoNa
+
is built according to the principles in the diagram below. There may be
some minor differences depending on the NoNa
+
that you are installing or you are
using.
Figure 2-1: Schematic diagram showing the basic operation of the NoNa
+
.
No. Name No. Name
1 Drain water tank 15 Gate valve (flow regulator)
2 EC sensor 16 Flow sensor
3 Sampling valve 17 Discharge valve (for discharging
wastewater to the sewer)
4 Valve for shutting off drain water 18 Ring filter, 55 microns (optional)
5 Valve for supplying drain water 19 Valve for selecting drain water or
fresh water
6 Valve for supplying fresh water 20 Drain water pump
7 Active carbon filter (optional) 21 Filter bypass valve
8 The area within the box marks the
NoNa
+
22 Fresh water tank
NoNa
+
9