Periods
If drain water is present, the NoNa
+
will start automatically during the active period.
You link a period to a drain water tank. If you are using more than one drain water
tanks, you will need to enter a period for each drain water tank. Do this as follows:
Navigate the path:
.
Tap the
Purification start time
setting. A pop-up menu appears.
Select the desired start time.
Tap the Confirm icon ‘
'.
Tap the
Purification end time
setting. A pop-up menu appears.
Select the desired end time.
Tap the Confirm icon ‘
'.
Tap the
Purification period active
setting. A pop-up menu appears.
Select Yes.
Tap the Confirm icon ‘
'.
You have set a period. Repeat this for the other drain water tanks.
If you set the same time for the purification start and end times, the NoNa
+
will remain active continuously.
Drain water tank
If there is more than one drain water tank and the same periods have been set for the
drain water tanks, the NoNa
+
will alternate the use of the drain water tanks. The
Maximum purification duration
setting enables you to specify how long the water in
each drain water tank will be purified. When this duration elapses, the NoNa
+
will
switch to another drain water tank that up to that point was in the 'queued' status.
In addition to the
Maximum purification duration
, you need to set the
Main pause time
for each drain water tank.
To do this, complete the following steps:
Navigate the path:
.
Tap the
Maximum purification duration
setting. A pop-up menu appears.
Select the desired duration.
Tap the Confirm icon ‘
'.
Tap the
Main pause time
setting. A pop-up menu appears.
Select the desired duration.
Tap the Confirm icon ‘
'.
You have set the maximum purification duration and the main pause time.
Switching stack polarity
The stack is charged and discharged. How long each of these phases lasts is defined
with the
Purification cycle time
setting.
The stack switching time enables you to specify the number of seconds that the
pumps will be switched off, so that the circuit can be reversed. This is 4 seconds by
default.
NoNa
+
58
Summary of Contents for NoNa+
Page 1: ...SV 2 4 15 05 2020 96000023 Installation and User Manual NoNa...
Page 70: ...Signature Date NoNa 70...
Page 71: ......
Page 72: ......
