Ridder NoNa+, Installation And User Manual

Page: 31 / 72

Please exercise caution when working with acid.
If you want to use a supply pipe for a different chemical substance, make sure to
check the following:
Clean the supply channel before use if there is any risk that the original
substance and replacement substance will react with one another.
Check whether the material that the channel is made of is suitable for the
intended chemical substance.
Keep a copy of the safety data sheets of the fertilizers used and other
chemicals used with the NoNa
+
.
3.3 Personal protective equipment
If PPE should be used, this will be indicated at the relevant location. Also see section
"Pictograms" on page 6.
3.4 Emergency stop
In the event of an emergency: switch off the NoNa
+
immediately.
The power switch is located on the NoNa
+
cabinet.
Figure 3-1: The power switch
Turn the power switch to the 0 (off) position to switch off the NoNa
+
.
NoNa
+
31