5.2
MultiMa
Do you have a MultiMa? Use Service Assistant to set the output of the sensor
correctly.
Make sure that the 'Input address
external contact' is linked to a
connection of an I/O card.
Go to the attributes of the
measurement.
Click the Change panels button, and
then select 'Change attributes of
inputs and outputs'.
Select the 'Input address external
contact’ measurement.
For attributes, select the 'Sensor type'
setting.
Click the ... button.
The
I/O attributes
window opens.
Select 'Universal sensor [0 - 100 [%]]'
with an output of 0 - 20 [mA].
Click the OK button.
The
I/O attributes
window closes.
You have set that the sensor has an output
of 0 - 20 mA.
Newton weighing system
17
