Product plate
Figure 2-8:
Example product plate
The product plate states:
Production number
2.5.2
Quality control
Every HortiJet-Go! is checked and tested for correct operation before shipment. The
corresponding certificate can be found in the documentation included with the unit.
When the HortiJet-Go! has been checked, it will be labelled with a control sticker. You
will find this sticker on the inside of the cabinet.
Figure 2-9:
Example control sticker.
The sticker shows:
Name of inspector.
Date inspected.
Inspector’s signature.
Please contact Ridder Growing Solutions if this label is missing.
2.5.3
Guidelines and standards
The HortiJet conforms to the essential requirements of the guidelines mentioned
below, and their adaptation guidelines.
Guidelines:
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
Machine Directive 2006/42/EC
HortiJet-Go!
18