Moisture content start
Use moisture content start to start irrigation based on the moisture content of
the soil (or substrate).
Contact start
Use contact start when using an external contact, such as a level sensor or
moisture sensor. Irrigation will start when the contact signals this.
6.3.10
Alarms
To consult triggered alarm messages, navigate to ‘View’ on the top bar, and then
select ‘Alarm messages’. The
Alarm messages
window opens.
Under alarm messages, you can use the buttons marked Confirm and Acknowledge.
Confirm
Use the Confirm button to indicate that an alarm has been resolved. The alarm
disappears from the list.
Acknowledge
Use the Acknowledge button to turn the alarm bell off. The alarm remains
active.
FertiMiX
55
