PTCS-7S Computerized Embroidery Machine Operation Manual V2.1
36
18.3 Main Axis Test
In the test interface menu, press
key to enter into the main axis test. Press
key corresponding to every test item, check whether the output is valid. If
corresponding equipment output has no action, the current output may have a fault. Please check
and make adjustments.
XY axis test: Press Up and Down keys to modify the mobile pulse number (1-127) of motor.
The default value is 12 pulses. Press
key to start back and forth movement.
Main axis test: Press
key to start rotation in speed of 100 rev / min. Press Up and
Down keys to modify the main axis speed and check whether the current rotation speed is
consistent with actual rotation speed. (Within 5 rev difference for 1000 rev).
QEP test: press
key to test main axis encoder line number and zero position.
18.4 Machine Head Test
In the test interface menu, pres
key to enter into machine head breakage test.
Press figure button to test corresponding needle bar. Check whether breakage detection is valid. If
the pre-out has a fault, Please check and make repairs.
