Ricoh VD4007001 Operating Instructions Manual Download Page 114

Page: 114 / 136

Direct Printing from a Digital Camera (PictBridge)

106

PictBridge Printing

Follow the procedure below to start PictBridge printing on this machine.

Important

❒

Do not disconnect the USB cable while data is being sent. If you do, printing
will fail.

❒

The USB host interface board is supplied with a USB cable and a hook onto
which you can roll up and hang the cable.

Attach the hook on the back of the machine near the USB connection slot.

Attach the hook where it will not interfere with machine operation and ac-
cess.

Check the machine and the digital camera are both switched on.

Connect a USB cable between the optional USB host interface board in-
stalled on the machine and the digital camera.

The Data In indicator on the machine blinks for several seconds and “Pct-
Brdg” is displayed on the machine. This indicates the machine recognizes the
digital camera as a PictBridge device.

Secure the USB cable using the hook.

On your digital camera, select the images you want to print, and specify the
printing conditions.

The machine receives settings from the digital camera and starts printing.

AMO100S

AMO101S

Summary of Contents for VD4007001









































































































































Search results

Summary of Contents for VD4007001

Reviews:

Related manuals for VD4007001

Brands by name

Popular brands

Ricoh VD4007001, Operating Instructions Manual

Search results

Summary of Contents for VD4007001

Reviews:

Related manuals for VD4007001

Brands by name

Popular brands