Copying
28
2
D
Select
[
Paper Type
]
using
{U}
or
{T}
, and then press the
{
OK
}
key.
E
Select
[
OHP (Transparency)
]
using
{U}
or
{T}
, and then press the
{
OK
}
key.
The “
Programmed
” message appears.
F
Select the paper size, if required.
G
Place the originals, and then press the
{
Start
}
key.
H
When the copy job is finished, press the
{
Clear Modes
}
key to clear the set-
tings.
Note
❒
Printing on OHP transparencies is slower than printing on plain paper.
Reference
p.23 “Loading Paper on the Bypass Tray”
When Copying onto Thick Paper
When copying onto thick paper, select
[
Thick Paper
]
in Paper Type.
Important
❒
To prevent multiple sheets from being fed at once, fan paper before placing it
on the tray.
A
Select
[
Byp.
]
using
{U}
or
{T}
.
B
Load thick paper face down on the bypass tray.
C
Press the
{
q
}
key.
Summary of Contents for VD0107571
