Ricoh VD0107571 Page 31 Operating Instructions Manual Download

Page: 31 / 86

2. Copying

This chapter describes procedures for making copies in various modes.

Basic Procedure

This section describes the basic procedure for making copies.

Make sure "

Ready

" appears on the screen.

If any other function is displayed, press the

{

Copy

}

key.

❖

Initial copy display

Make sure no previous settings remain.

When there are previous settings remaining, press the

{

Clear Modes

}

key.

Place the originals.

Make desired settings.

Enter the number of copies using the number keys.

The maximum copy quantity that can be set is 999.
The default quantity is 99.
To change the maximum copy quantity, press the

{

User Tools/Counter

}

key.

Press the

{

Start

}

key.

The machine starts copying.
When placing originals on the exposure glass, press the

{

}

key after all

originals are scanned.
Copies are delivered face down.

ARB027S

Summary of Contents for VD0107571























































































Search results

Summary of Contents for VD0107571

Reviews:

Related manuals for VD0107571

Brands by name

Popular brands

Ricoh VD0107571, Operating Instructions Manual

Search results

Summary of Contents for VD0107571

Reviews:

Related manuals for VD0107571

Brands by name

Popular brands