Ricoh VD0107571 Operating Instructions Manual Download Page 28

Page: 28 / 86

Placing Originals

Select the original size using the scroll keys, and then press the

{

}

key.

The “

Programmed

” message appears.

When the regular size originals settings are registered,

appears

on the top of the copy display.

Note

❒

This function is not available in Auto Paper Select mode.

❒

To cancel the size you have set, press the

{

Clear Modes

}

key.

Custom sizes

When placing custom size originals on the exposure glass or in the ARDF, spec-
ify the size of the originals using the number keys.

Important

❒

Originals that have a vertical length of 105–297 mm (4.2"-11.6") and a horizon-
tal length of 128-1,260 mm (5.1"-49.6") can be specified.

Select

[

Byp.

]

using

{U}

{T}

Press the

{

}

key.

Select

[

Original Size

]

using

{U}

{T}

, and then press the

{

}

key.

Summary of Contents for VD0107571























































































Search results

Summary of Contents for VD0107571

Reviews:

Related manuals for VD0107571

Brands by name

Popular brands

Ricoh VD0107571, Operating Instructions Manual

Search results

Summary of Contents for VD0107571

Reviews:

Related manuals for VD0107571

Brands by name

Popular brands