Ricoh VB2807800, Operating Instructions Copy Reference

Page: 55 / 76

49
4. User Tools ( Copier Features )
Accessing User Tools ( Copier Features )
This section is for key operators in
charge of this machine. Key operators
can change or make default settings.
Note
❒
Be sure to quit User Tools and re-
turn to the initial copy display
when all settings are complete.
This section describes system set-
tings for the copier function.
❒
Selected settings are highlighted.
❒
Any changes made with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the
{
Clear
Modes
}
key is pressed.
Reference
For details, see "User Tools ( Sys-
tem Settings )",
General Settings
Guide .
Changing Default Settings
Note
❒
If a key operator code is set, the
key operator code input display
appears before you can change the
default settings. For details about
access codes, see “ Key Operator
Tools ”,
General Settings Guide .
A
Press the
{
User Tools/Counter
}
key.
B
Select [ Copier Features ] using
{U}
or
{T}
, and then press the
{
OK
}
key.
C
Select the menu using
{U}
or
{T}
,
and then press the
{
OK
}
key.
ARK004S