manualshive.com logo in svg

Ricoh SP C435DN, User Manual

Share
Download
Ricoh SP C435DN User Manual Download Page 42

Loading Orientation-Fixed Paper or Two-Sided

Paper

Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, or copied paper)
might not print correctly, depending on how the paper is placed.

Settings using the control panel

Set [Letterhead Setting] in [Machine Modes] under [Print Settings] to [Auto Detect] or [On
(Always)], and then place the paper as shown in the table below. For details about [Letterhead
Setting], see "Machine Modes", Operating Instructions.

Paper orientation

The meanings of the icons are as follows:

Icon

Meaning

Place or load paper printed side face up.

Place or load paper printed side face down.

Print side

Trays 1–4

Bypass tray

One-sided

Two-sided

• To print on letterhead paper when [Letterhead Setting] is set to [Auto Detect], you must specify

[Letterhead] for the paper type in the printer driver's settings.

2. Loading Paper

40

Summary of Contents for SP C435DN





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands