Ricoh SP C352dn User Manual Download Page 25

Page: 25 / 124

Turning On/Off the Power

This section explains how to turn on/off the printer.

Turning On the Power

Make sure the power cord is firmly plugged into the wall outlet.

Push the main power switch.

DSE313

The power indicator turns on.

Turning Off the Power

• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.

Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.

• Do not press and hold the main power switch when turning off the printer. Doing so shuts down the

printer forcefully and may damage the hard disk causing a malfunction of the printer.

• Before unplugging the power cord plug, turn off the power switch and make sure the power switch

indicator turns off. Not doing so may result in damage to the hard disk or memory, leading to a
malfunction.

• Do not turn off the power while the printer is in operation.

Turning On/Off the Power

Summary of Contents for SP C352dn





























































































































Search results

Summary of Contents for SP C352dn

Reviews:

Related manuals for SP C352dn

Brands by name

Popular brands

Ricoh SP C352dn, User Manual

Search results

Summary of Contents for SP C352dn

Reviews:

Related manuals for SP C352dn

Brands by name

Popular brands