manualshive.com logo in svg

Ricoh SP C260SFNw, User Manual, Page: 431 / 444

Share
Download
Ricoh SP C260SFNw User Manual Download Page 431

ENERGY STAR Program

ENERGY STAR

®

 Program Requirements for Imaging Equipment

The ENERGY STAR

®

 Program Requirements for Imaging Equipment encourage energy conservation

by promoting energy efficient computers and other office equipment.
The program backs the development and dissemination of products that feature energy saving
functions.
It is an open program in which manufacturers participate voluntarily.
Energy Star standards and logos are internationally uniform.

Saving Energy

This machine is equipped with the following Energy Saver modes: Energy Saver mode 1 and Energy
Saver mode 2. If the machine has been idle for a certain period of time, the machine automatically
enters Energy Saver mode.
The machine recovers from Energy Saver mode when it receives a print job, prints a received fax, or
when any key is pressed.

Energy Saver mode 1

The machine enters Energy Saver mode 1 if the machine has been idle for about 30 seconds. It
takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver
mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2.

Energy Saver mode 2

The machine enters Energy Saver mode 2 after the period of time specified for this setting is
passed. Power consumption is lower in Energy Saver mode 2 than in Energy Saver mode 1, but it
takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.

Information for This Machine

429

Summary of Contents for SP C260SFNw





























































































































































































































































































































































































































































Reviews:

No comments