Ricoh SP C260SFNw User Manual Download Page 361

Page: 361 / 444

Carefully remove any paper that is jammed under the transfer unit.

DUE249

If you cannot find the jammed paper, look inside the machine.

Using both hands, carefully push up the front cover until it closes.

DUE229

When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.

Removing Scanning Jams

• Be careful not to hold the input tray when lifting the ADF, for the tray might be damaged.

If a paper jam occurs in the ADF, follow the procedure below to remove the jammed paper.

Removing Paper Jams

359

Summary of Contents for SP C260SFNw





























































































































































































































































































































































































































































Search results

Summary of Contents for SP C260SFNw

Reviews:

Ricoh SP C260SFNw, User Manual, Page: 361 / 444

Search results

Summary of Contents for SP C260SFNw

Reviews: