Ricoh SP 3710DN Page 54 User Manual Download

Page: 54 / 208

• When fanning envelopes, make sure they are not stuck together. If they are stuck together,

separate them.

• When fanning envelopes, make sure the envelope flaps are not stuck. If they are stuck, separate

them.

• Before loading envelopes, flatten them out so that their curl does not exceed that shown as shown

below.

DAC574

• If the curl is severe, flatten out the envelopes using your fingers, as shown below.

DAC575

Non-Recommended Paper Types

Do not use the following types of paper:

• Ink-jet printer paper
• Bent, folded, or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Dirty or damaged paper

2. Paper Specifications and Adding Paper

Summary of Contents for SP 3710DN

















































































































































































































Search results

Summary of Contents for SP 3710DN

Reviews:

Related manuals for SP 3710DN

Brands by name

Popular brands

Ricoh SP 3710DN, User Manual

Search results

Summary of Contents for SP 3710DN

Reviews:

Related manuals for SP 3710DN

Brands by name

Popular brands