Ricoh SP 3600dn, User Manual

Page: 40 / 100

Loading Paper into the Bypass Tray
• For details about trays that can be loaded for each paper size and type, see page 26 "Paper Size
Specifications" and page 29 "Paper Type Specifications".
• Make sure the paper stack does not exceed the upper limit mark. Excessive stacking can cause
paper jams.
• Do not mix different types of paper.
• After loading paper, specify the paper size and type using the control panel. When printing a
document, specify the same paper size and type in the printer driver as specified on the printer.
• When loading label paper, load it one by one.
1. While pressing and holding the bypass tray open lever in the upper center of the bypass
tray, pull the tray open.
CZF036
Pull the extender out when loading paper larger than A4 or 8
1
/
2
× 11 .
CZF037
2. Loading Paper
38