manualshive.com logo in svg

Ricoh SP 202 SN, Operating Instructions Manual

Share
Download
Ricoh SP 202 SN Operating Instructions Manual Download Page 82

1.

Press the [Scanner] key.

CTT128

If you are using Scan to USB, proceed to Step 4.

2.

Using the number keys, enter the number of a registered scan destination.

For details, see page 74 "Registering the Scan Destination".

3.

Press the [OK] key.

4.

Press the [ ] or [ ] key to select [Density], and then press the [OK] key.

5.

Press the [ ] or [ ] key to select the density level, and then press the [OK] key.

6.

Press the [ ] key to return to the initial screen.

Specifying Resolution

There are three resolution settings. The higher the resolution, the higher the quality but greater the file
size.

1.

Press the [Scanner] key.

CTT128

If you are using Scan to USB, proceed to Step 4.

2.

Using the number keys, enter the number of a registered scan destination.

For details, see page 74 "Registering the Scan Destination".

5. Scanning Originals

80

Summary of Contents for SP 202 SN

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands