Ricoh SP 202 SN Operating Instructions Manual Download Page 59

Page: 59 / 208

4. Copying Originals

Copier Mode Screen

Standby mode screen

• First line:

Displays the function and paper size specified on the machine. The following five functions are
available:

• Copier, ID Card Copy, Sort, 2 Sided Copy, 2 Sided/Sort

• Second line:

Displays the copy magnification ratio or combine setting ([2 on 1] or [4 on 1]), document
type, and the number of copies.

Settings that can be specified for the current job

By pressing the [ ] or [ ] key in the Standby mode screen, you can specify the following settings
for the current job.

• Tray Paper Settings (paper size)
• Sort
• Original Type
• Density
• Reduce/Enlarge
• Combine
• 2 Sided Copy

• The start-up mode can be specified in the [Function Priority] setting under [System Settings].
• If paper is loaded in the bypass tray, the paper size specified in [Bypass Ppr Settings] appears

(except for Sort and 2 Sided Copy).

Summary of Contents for SP 202 SN

















































































































































































































Search results

Summary of Contents for SP 202 SN

Reviews:

Brands by name

Popular brands

Ricoh SP 202 SN, Operating Instructions Manual

Search results

Summary of Contents for SP 202 SN

Reviews:

Brands by name

Popular brands