manualshive.com logo in svg

Ricoh SP 202 SN, Operating Instructions Manual

Share
Download
Ricoh SP 202 SN Operating Instructions Manual Download Page 53

3. Printing Documents

Basic Operation

Use the printer driver to print a document from your computer.

1.

After creating a document, open the [Printing Preferences] dialog box in the document's
native application.

2.

Change any print settings if necessary.

The following print settings can be specified using the printer driver:

• Printing multiple pages on a sheet
• Splitting a single page across multiple sheets
• Printing on both sides of sheets
• Not having blank pages printed
• Having prints sorted
• Saving printer driver settings as a file
• Recalling and deleting saved printer properties settings
• Printing on a custom size paper
• Printing a large paper size document on smaller size paper
• Reducing and enlarging a document size
• Changing the print resolution
• Saving on toner when printing
• Changing the dithering pattern
• Having text stamped on prints

For details about each setting items, click [Help].

51

Summary of Contents for SP 202 SN

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands