Ricoh SP 200SF, Operating Instructions And User Manual

Page: 59 / 192

Specifying 2 Sided Copying
1. Press the [ ] key.
CTT101
On a Type 4 model, press the [ ] key. If ID card copy mode is being displayed,
press the [ ] key again to switch to normal copier mode.
2. Press the [ ] or [ ] key in the standby mode screen to select [2 Sided Copy], and then
press the [OK] key.
3. Press the [ ] or [ ] key to select [Top to Top] or [Top to Bottom], and then press the [OK]
key.
4. Press the [ ] or [ ] key to select the orientation, and then press the [OK] key.
5. Press the [ ] key to return to the initial screen.
6. Place the original on the exposure glass or in the ADF.
7. To make multiple copies, enter the number of copies using the number keys.
8. Press the [ ] key.
CTT008
When you place the original in the ADF, all the pages are automatically scanned and then only the
pages on one side are copied sequentially. Proceed to Step 10.
When you place the original on the exposure glass, perform the following steps to scan the
subsequent pages.
Making 2-sided Copies
57