Ricoh RW-480 PLOTCLIENT WIN, Software Manual

Page: 94 / 153

CONFIGURATION
Settings for AutoCAD 13/14 in print dialog
To set up the printer with the print dialog in AutoCAD 13 or 14
proceed as follows:
1. Start your AutoCAD program.
2. Open a drawing.
3. Use "File – Print" to go to the print dialogue "Plot Configura-
tion".
4. Click on the button "Device and Default Selection" and then
make your choice from the list of HP-GL/2 printers (e.g. HP
DesignJet 1055). Press "OK" to confirm.
5. Back in the window "Plot Configuration", in the section "Ad-
ditional Parameters" activate the option "Plot To File". In the
AutoCAD 14 dialogue, also activate "Autospool". Press "OK"
to confirm.
6. When you start the printing procedure, the window "Select
Printer" appears.
7. Press "OK" to confirm the default printer.
8. In the next window "Enter Plotserver IP", enter the name or IP
address of the PC where RW-480 PLOTBASE is running and
press "OK" to confirm.
9. In the window "Enter Spool Directory", enter the required
spool directory and press "OK" to confirm".
10. This brings you to the window with print parameter settings
for RW-480 PLOTCLIENT HDI/ADI.
Settings for AutoCAD 200x in print dialog
To set up the printer with the print dialog in AutoCAD 200x pro-
ceed as follows:
1. Start your AutoCAD program.
2. Open a drawing.
3. Use "File – Print" to open the window "Plotter Manager".
4. Open the dialogue "Add A Plotter Wizard" and click on
"Next".
5. To select a printer, click on "My Computer" and click on
"Next".
6. Select printer "RW-480 PLOTCLIENT HDI" from the manu-
facturer list "RW-480" and click on "Next".
If you cannot find the RW-480 printer in the manufacturer's
RW-480 CLIENTS 94