Ricoh RW-480 PLOTCLIENT WIN, Software Manual

Page: 73 / 153

COLLATE JOBS
If you do mark an entry, new entries are always inserted at
the end of the list.
2. Select the relevant menu item from the "Edit" menu. If the
new entry is to be inserted after the marked entry, select:
Edit – add entry...
If the new entry is to be inserted in front of the marked entry,
select:
Edit – insert entry...
The program opens a file selection window.
3. Select the required file, which has one of the above file for-
mats and confirm with "OK". You can now mark several files
to insert lots of drawings in one go, as in the File Manager.
Add with Drag & Drop
To add an entry using Drag & Drop, proceed as follows:
1. Open Windows Explorer and arrange the two windows of
RW-480 PLOTCLIENT WIN and Explorer so that they are po-
sitioned next to each other or on top of each other.
2. Mark an entry in the entry list of RW-480 PLOTCLIENT WIN,
after which the new entry is to be inserted.
If you want to insert a new entry in front of an existing entry,
mark the entry in the entry list before the existing entry!
If you do not mark any entry, new entries will always be in-
serted at the end of the list.
3. Change to the folder in Explorer from which you want to
fetch the new entry.
4. Click on the required file with the left-hand mouse button
and holding the mouse button pressed down, drag the file to
the file list of RW-480 PLOTCLIENT WIN. You can also add
several drawings in one go as in Explorer by marking several
files.
RW-480 CLIENTS 73