PEN
SETTINGS
Calcomp - Pens
The pen attributes are set on the "Pen" tab:
•
Pen size
The pen sizes are entered directly using the keyboard in the first
column under "Size". The maximum values that can be entered
depend on the size unit, which you set in the configuration pro-
gram. The current valid size unit is shown in the status bar at the
bottom of the screen.
If you want to "remove" a pen, you can set the pen widths as "0"
or as the pen color "White".
The standard values for the pen widths of the 16 Calcomp pens
are given in the technical manual (Chapter "Calcomp com-
mands and pens").
•
Pen
color
Select the pen color from the second column under "Color".
Open the pull down menu and select the required color. If you
want to "remove" a pen, you can set the pen color as "White" or
the pen widths as "0". You can set the gray shade that a color
represents on the "Colors" tab.
RW-480 CLIENTS 63
Summary of Contents for RW-480 PLOTCLIENT WIN
