Ricoh RW-480 PLOTCLIENT WIN, Software Manual

Page: 112 / 153

CONFIGURATION
• Log Info on New Job
You can have a log file produced, in which the most important
editing processes carried out for a job are stored. If you want
this option, activate the check box in front of "log job info" field.
Now enter a path for the file (e.g. c:\spool\pcweblog.txt) in this
field. If the file cannot be found in a folder of the computer on
which RW-480 PLOTCLIENT WEB is, but is to be saved on an-
other computer, use a UNC path entry. If you want to print off
this log-file and the log-file information for each job is to be
printed on a separate page, activate the option "Page break (FF)
attach" by clicking on the check box.
• Language :
Select a language for the configuration from the list filed. The
selected language will also be used for new users initially. Each
user can however also change the language again.
• Measure
Here you can preset the unit of measurement that is to apply for
all work with RW-480 PLOTCLIENT WEB. You can choose be-
tween "Millimeters" and "Inches".
After you have entered all these entries, confirm this by clicking
on "accept".
E-mail (e-mail)
The user can have a message sent by e-mail about whether the
print job has arrived at RW-480 PLOTBASE, whether errors
occurred while processing the print job or whether the print job
was successfully processed. For this, a mail server must be in-
stalled. Proceed as follows:
1. First open the corresponding configuration window by click-
ing on "e-mail":
RW-480 CLIENTS 112