CONFIGURATION
Set spool path (upload)
The job and drawing files of RW-480 PLOTCLIENT WEB are
stored in a local spool folder. This is normally the subfolder
c:\spool\ssl. This is where both the SSL files required for RW-
480 PLOTBASE, and the drawing data assigned to each job are
stored in individual subdirectories. To work correctly, it is very
important that you enter the complete local path. The spool
paths, which are given for RW-480 PLOTCLIENT WEB and for
RW-480 PLOTBASE must show the identical folder. Use of UNC
path details can be used if RW-480 PLOTBASE and RW-480
PLOTCLIENT WEB are installed on different computers.
Attention
:
The Apache Web Server must be logged
on as a service with user rights where RW-480
PLOTBASE is located on another computer.
Proceed as follow to enter the spool path:
1. Click on the "upload" button. The following window opens:
2. Enter the spool path; enter the path that leads from RW-480
PLOTBASE to the spool path and confirm the entry with "ac-
cept".
RW-480 CLIENTS 110
Summary of Contents for RW-480 PLOTCLIENT WIN
