CONFIGURATION
Configuration
The configuration of the program is carried out by an adminis-
trator. They can access the configuration page from any com-
puter within the network, if they have the relevant access
password. The following properties can be set on the configura-
tion page:
•
Access rights for individual users,
•
Paths for print jobs, response messages and job logs,
•
Password for the configuration page.
Open the configuration page
You have two possible options for opening the configuration
pages in the browser. Select the menu command "Start – Pro-
grams – RW-480 – RW-480 – RW-480 PLOTCLIENT WEB
Admin" on the server or enter the following configuration page
address in the address line of your browser:
http://127.0.0.1/pcweb/config/pbconfig.pbx
The numeric IP address of the "loopback interfaces" (127.0.01)
can only be given at the server. To open the configuration page
in the browser of another computer within the network too, you
can also enter the name of the server.
The start page looks like this:
After opening the page you must enter a user name (user) a
password. The standard for the user name and password is the
word "admin". You should change this password (see chapter
RW-480 CLIENTS 107
Summary of Contents for RW-480 PLOTCLIENT WIN
