Ricoh Ri 2000, Quick Installation Manual

Page: 37 / 72

35
Printer Setup
The setting of IP address for the machine
The setting method of IP address for this machine are two patterns.
Case1: For connecting directly to the printer from a PC that is not parts of a network.
Case2: For DHCP setup
Case1: For connecting directly to the printer from a PC that is not parts of a network.
[Confirming IP address of your PC]
1. Open the command prompt dialogue box on your PC.
2. Type “ipconfig” in the first line in the command prompt.
3. In the “Ethernet adapter Ethernet” section, use the IP address but change the last 3 digits to a
number that will be unique to the printer and the “Subnet Mask”.
In the example below, we took 192.168.0.2 and will assign 192.168.0.3 to the printer.
4. Proceed to Step 1 in [Configuring the IP address of the machine].
[Configuring IP address of the machine]
1. Press the Setting tab on the touch panel of this machine.