8
•
Be sure to disconnect the plug from the wall outlet at least once a year and check for the following:
•
There are burn marks on the plug.
•
The prongs on the plug are deformed.
•
The power cord's inner wires are exposed, broken, etc.
•
The power cord's coating has a crack or dent.
•
When bending the power cord, the power turns off and on.
•
Part of the power cord becomes hot.
•
The power cord is damaged.
•
If any of the above conditions exist, do not use the plug and consult your dealer or service
representative. Use of the plug may result in fire or electric shock.
•
When unplugging the machine, always pull the plug, not the cord. Pulling the cord can damage it. Use
of a damaged power cord may result in fire or electric shock.
•
Be sure to push the power plug fully into the wall outlet. A partially inserted plug creates an unstable
connection that can result in an unsafe buildup of heat.
•
Be sure to disconnect the plug from the wall outlet and clean the pins and the area around the pins at
least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
•
When maintaining the machine, always turn off the power at the back of the machine.
Power source
•
100-120 Vac, 2.5 A, 50/60 Hz
Voltage must not fluctuate more than 10%.
Please be sure to connect the power cable to a power source as above.
Confirm that the wall outlet is near the machine and freely accessible, so that in event of an emergency,
it can be unplugged easily.
Handling the main machine
•
Keep infants away from polythene materials (bags, etc.) used to wrap the machine and its accessories.
Suffocation may result if polythene materials are brought into contact with the mouth or nose.
•
If the machine emits smoke or odor, or if it behaves unusually, you must turn off its power immediately.
After turning off the power, be sure to unplug the machine. Then contact your service representative
and report the problem. Do not use the machine. Doing so may result in fire or electric shock.
Summary of Contents for Ri 2000
