- 5 -
Perform printing
Here, the printing method using a sample image included in the CD of the JV 34 Operation Manual.
1.
Double-click
to start the attached RICOH Software RIP.
• The main window of the attached RICOH Software RIP is displayed.
2.
Set the CD of RICOH Pro L4130/L4160
Operation Manual into the disk drive.
3.
Click [Print Guide / Sample data].
• The “Print Guide and Sample Data” dialog is dis-
played.
4.
To select the data you want to print from the RICOH Software RIP, select
[File], and then [Open] from the menu.
• The “Select file name to print” window appears.
5.
Select the file to be printed, and click [Open].
• If more than one printer is registered, select [ProL4160] from [Printer Name].
• For details on the Favorites setting, see the RICOH Software RIP Reference Guide.
• The file is loaded. The loaded file is displayed on the [ProL4160] tab in the main window.
• Check
P. 2 to P. 4 “First, confirm the following items:”
without fail before creating a seal/a
sticker.