Ricoh Pro C720s, Operating Instructions Manual

Page: 83 / 212

Original Type Display
You can have the original types shown on the initial display.
The default setting is Display.
If you select [Hide], the display is as below.
Alert Sound: Original left on Exposure Glass
The beeper (Key tone) sounds if you forget to remove originals after copying.
The default setting is On.
If Panel Key Sound of General Features (System Settings) is [Off], the beeper does not sound
irrespective of the "Alert Sound: Original left on Exposure Glass".
Job End Call
Choose whether or not the beeper sounds when copying is complete.
The default setting is On.
If Panel Key Sound of General Features (System Settings) is [On], the machine beeps to notify you
that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of
paper, or a paper jam occurred.
Switch Original Counter Display
Specify the original counter display.
The default setting is Original Sheet Counter.
General Features
81
4