Ricoh PRO C7200S Operator'S Manual Download Page 413

Page: 413 / 552

11. Troubleshooting

This chapter explains how to resolve problems that have occurred.

Getting Started

This section describes the items to check when the machine does not work properly.

When the Machine Makes a Beeping Sound

The machine makes various beeping sounds to alert users about left originals and other machine
conditions.

Beep pattern

Meaning

Cause

Single short beep

Notification Sound
Login/Logout

A control panel or screen key was
pressed. You also hear a beeping
sound in this pattern when you log in to
or out from the machine.

Short, then long beep

Operation Invalid

An invalid key was pressed on the
control panel or screen, or the entered
password was incorrect.

Single long beep

Operation Completed

A Copier/Document Server Features
job has finished.

2 long beeps

Warm-up

When the power is turned on or the
machine exits Sleep mode, the
machine has fully warmed up and is
ready for use.

5 long beeps

Auto Reset

An auto reset was performed through
the simple screen of the Copier/
Document Server function or the
Scanner function.

5 long beeps repeated four
times.

Sound of Less Urgent Level

An original has been left on the
exposure glass or paper tray is empty.

5 short beeps repeated five
times.

Sound of Urgent Level

The machine requires user attention
because paper has jammed, the toner
needs replenishing, or other problems
have occurred.

411

Summary of Contents for PRO C7200S









































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PRO C7200S

Reviews:

Ricoh PRO C7200S, Operator'S Manual, Page: 413 / 552

Search results

Summary of Contents for PRO C7200S

Reviews: