Ricoh Pro C5200s, User Manual

Page: 289 / 300

Type 1 Type 2
Time of switch into Low Power mode 15 minutes 15 minutes
Time of switch out from Low Power
mode
*1*2
31.7 seconds 32.8 seconds
Reduced electrical consumption in
Sleep mode
*1
0.76 W 0.75 W
Time of switch into Sleep mode 60 minutes 60 minutes
Time of switch out from Sleep mode
*1
119 seconds 119 seconds
Duplex Function
*3
Standard Standard
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2 Image adjustment may take around 100 seconds.
*3 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used
with) a duplex tray and the duplex function is enabled as an option.
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see "Timer Settings", Connecting the
Machine/ System Settings.
• The machine enters sleep mode directly in the following situations:
• Low Power Mode Timer and Sleep Mode Timer are set to the same time
• Sleep Mode Timer is set to a shorter time than Low Power Mode Timer
• Depending on which embedded software application is installed on it, the machine might take
longer than indicated to enter Sleep mode.
User Information on Electrical and Electronic Equipment (mainly
Europe)
Users in the countries where this symbol shown in this section has been specified in
national law on collection and treatment of E-waste
Our Products contain high quality components and are designed to facilitate recycling.
Our products or product packaging are marked with the symbol below.
Information on Environmental Regulations
287