Ricoh Pro C5200s, User Manual

Page: 256 / 300

Message Cause Solution
"HDD Full" The hard disk became full
while you were printing a
Sample Print, Locked Print,
Hold Print, or Stored Print
file. Delete unneeded files stored on the
machine.
Alternatively, reduce the data size of
the Sample Print, Locked Print, Hold
Print, or Stored Print file.
"HDD is full. (Auto)" The hard disk became full
while you were using the
error job store function to
store Normal Print jobs as
Hold Print files. Delete unneeded files stored on the
machine.
Alternatively, reduce the data size of
the Temporary Print file and/or the
Stored Print file.
When there is not enough memory
Message Cause Solution
"84: Error" There is no work area
available for image
processing. Decrease the number of files sent to the
machine.
"92: Error" Printing was canceled
because [Job Reset] or the
[Stop] key was selected on
the machine's control panel. Perform the print operation again if
necessary.
When there is a problem with a parameter
Message Cause Solution
"86: Error" Parameters of the control
code are invalid. Check the print settings.
9. Troubleshooting
254