Ricoh Pro 5210S, Operating Instructions Manual, Page: 35 / 164

[Machine: Image Quality]
0201: [Adjust Image Density/ DEMS]
Execute image density control manually.
DEMS can reduce the variations in thickness that occur in the intervals between the photoconductor and
development sleeve operations.
The machine adjusts the image density. This operation takes about 30 seconds during which a message
appears on the control panel. Do not pull out the drawer while the message is being displayed.
If the density does not change after applying this function several times, contact your sales or service
representative.
Setting Items Values
[Image Density Adjustment: Manual Execute] Press [OK].
[Execute DEMS]
• The machine executes automatic image density adjustment after a set interval or after printing a
specified number of sheets. However, you can also manually initiate automatic image density
adjustment whenever you want.
0202: [Image Density Adjustment Execute Interval]
Specify the number of sheets the machine prints in full color before it automatically adjusts image
density.
After printing the specified number of sheets, the machine automatically adjusts image density.
If you set this to "0", image density adjustment will not be executed automatically.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[No. of Pages per Interval (Color
Printing)] 0 5000 0 1 sheet(s)
• If you need to adjust the image density manually for machine maintenance, execute [Adjust Image
Density/DEMS].
Setting Values
33