Ricoh PRIPORT JP730, Operating Instructions Manual, Page: 24 / 82

Operation
20
1
Adjusting the Print Image Density
You can adjust the print image densi-
ty to suit your needs. There are two
ways to do this:
❖ ❖ ❖ ❖
Before Making a Master
Adjust the image density using the
{{{{
Image Density
}}}}
key.
❖ ❖ ❖ ❖
After Making a Master
Adjust the image density using the
{{{{
Speed
}}}}
key.
Before Making a Master
AAAA
Use the
{{{{
Image Density
}}}}
key before
pressing the
{{{{
Master Making
}}}}
key.
After Making a Master
AAAA
Press the
{{{{
Speed
}}}}
key to decrease
the printing speed. Press it again
to bring the printing speed back
to Fast.
Note
❒
The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.