Ricoh Priport DX 4640PD, Operating Instructions Manual

Page: 197 / 240

Settings You Can Change with User Tools
185
5
Settings You Can Change with User Tools
System Settings
General Features
❖
Panel Beeper
Turns the beeper on or off.
• All On (The beeper sounds when
you press a key or when warning
messages appear on the display.)
• Warning Only (The beeper sounds
only when warning messages are
shown on the display and not
when you press a key.)
• All Off (The beeper does not
sound at all.)
Note
❒
Default: Warning Only
❖
mm/inch
You can select the units of mea-
surement shown on the display.
Note
❒
Default:
• Metric version:
mm
• Inch version: inch
Timer Settings
❖
Set Date
You can set the date for the ma-
chine's internal clock using the
number keys.
Note
❒
To change between year, month
and day, press
[
←
] and [
→
] .
❖
Set Time
You can set the time for the ma-
chine's internal clock using the
number keys.
Note
❒
To change between hours, min-
utes and seconds, press
[
←
]
and [
→
] .
❖
System Auto Reset Timer
The System Reset setting automati-
cally switches to the initial screen
when no operations are in progress,
or when an interrupted job is
cleared. This setting determines the
system reset interval.
Note
❒
Default: Off
❒
The time can be set from 1 to 5
minutes.
❖
Energy Saver Timer
You can set the time that the ma-
chine waits before switching to
lower power mode after printing
has finished or the last operation is
performed.
The time can be set from 1 minute
to 120 minutes.
Note
❒
Default: 3 min.
❒
When in "Energy Saver Mode",
the machine is ready for use
within 240 seconds.
❖
Auto Off Timer
You can select to use the auto off
timer and set the daily power off
time.
Note
❒
Default: Off