manualshive.com logo in svg

Ricoh Priport DX 4640PD, Operating Instructions Manual, Page: 184 / 240

Share
Download
Ricoh Priport DX 4640PD Operating Instructions Manual Download Page 184

Troubleshooting

172

4

Changing the Paper Size

Changing the Paper Size of the 
Paper Feed Tray

A

Remove the paper from paper
feed tray.

The paper feed tray will lower.

B

Make sure that the paper feed
side plates knob lock lever is
raised (lock is released), and then
grasp the paper feed side plates
knob and adjust the paper feed
side plates to match the paper
size.

Important

❒

Always adjust the position with
the lock lever for the paper feed
side plates in the raised position
(lock released).

C

Place the paper on the paper feed
tray.

Note

❒

Correct the paper curl before
loading the paper. If you cannot
do so, stack the paper with the
curl face down.

D

Make sure that the paper feed
side plates are touching both
sides of the paper, and then push
the lock lever for the side plates
down to lock the side plates into
position.

Important

❒

Always make sure that you push
the lock lever for the side plates
down to lock the side plates into
position.

AUY042S

AUY029S

AUX114S

AUX039S

Summary of Contents for Priport DX 4640PD

















































































































































































































































Reviews:

No comments