manualshive.com logo in svg

Ricoh Priport DX 4640PD, Operating Instructions Manual, Page: 170 / 240

Share
Download
Ricoh Priport DX 4640PD Operating Instructions Manual Download Page 170

Troubleshooting

158

4

• When paper edges stick together

or paper is not fed in, fan the paper
as shown.

• When printing onto postcards or

thick paper, lower the printing
speed to setting 1 or 2. See p.60
“Changing the Printing Speed”.

• When a multiple feed occurs or the

paper comes out skewed, make
sure that the paper feed side plates
are properly adjusted. When you
load paper in the paper feed tray,
make sure that the paper edge
touches the back fence and paper is
placed on the proper paper size
scale. Only use paper where the
leading edge has two right angle
corners.

”

x

 + A + B” Paper Misfeeds in 

the Paper Feed Section

A

Open the front cover.

B

Push the drum unlocking switch
to unlock the unit.

C

Lower drum unit lock lever (B1).

D

Take out the drum.

Note

❒

For taking out the drum unit,
see p.134 “Changing the Colour
Drum Unit”.

TPEY080J

AUX115S

AUX116S

AUX117S

AUX118S

Summary of Contents for Priport DX 4640PD

















































































































































































































































Reviews:

No comments