manualshive.com logo in svg

Ricoh Printer, Operating Instructions Manual, Page: 147 / 154

Share
Download
Ricoh Printer Operating Instructions Manual Download Page 147

139

6. The Functions and Settings

of the Machine

Mainframe

Network Guide, PostScript 3 Supplement, and UNIX Supplement cover all mod-
els, and explain all necessary functions and settings. This chapter describes the
functions and settings used for configuring the model you are using.
For details about functions and setting items, see Network Guide, PostScript 3
Supplement and UNIX Supplement.

Reference

Network Guide
PostScript 3 Supplement
UNIX Supplement

Functions

The following functions are available with the machine:
• Copy
• Printer
• Scanner
• Document Server

Note

❒

The machine must be equipped with the Printer/Scanner Unit in order to use
the printer or scanner function.

Interface

The following interfaces are available with the machine:
• Ethernet (100BASE-TX / 10BASE-T)
• USB (2.0)
• IEEE 802.11b (Wireless LAN) (Optional)
• Gigabit Ethernet (Optional)

Note

❒

To use the IEEE 802.11b (wireless LAN) interface, the machine must be
equipped with the corresponding unit for that interface.

❒

The IEEE 802.11b (wireless LAN) interfaces cannot be installed together - only
one such interface can be installed.

Summary of Contents for Printer



























































































































































Reviews:

No comments