English
User Settings
Default Settings 1
Power Off on No Signal
Sets the countdown timer interval. The countdown timer will
start, when there is no signal being sent to the projector. The
projector will automatically power off when the countdown has
fi nished.
Auto Input Search
When this function is turned “On”, the projector will search for
other signals if the current input signal is lost. When this function
is turned “Off”, it will only search a specifi ed connection port.
Power On Method
Sets whether to turn on the power when the ON/STANDBY but-
ton is pressed (Manual), or when the main power switch is turned
on (Auto).
Standby Energy Saving
High: Choose “High” to save standby power (less than 0.5W).
Monitor Out port and LAN control function will be disabled
in standby mode.
Low: Choose “Low” to return to normal standby mode.
Lamp Power
Eco: Choose “Eco” to lower lamp power consumption and
extend the lamp life.
Stnd: Standard mode.
If [Power on Meth-
od] is set to [Auto],
then if the power is
supplied when re-
stored after a power
outage, the projector
will come on.
Note
Summary of Contents for PJ X5260
Page 59: ...2012...
Page 60: ...EN GB Y017 6220 User s Manual...
