Ricoh PJ X5260, User Manual

Page: 30 / 60

9
English
User Settings
The Projector has a multilingual On Screen Display that al-
lows you to make image adjustments and change a variety of
settings.
How to operate
To open the OSD, press “Menu” on the Control Panel or Remote
Control.
When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
key to enter sub menu.
Use keys to select the desired item in the sub menu and
press “Enter” to adjust the settings by or key. To
exit from adjusting the item, press “Enter” again.
If “to setting” word is shown in the setting, you can press “Enter”
to enter another sub menu. Press “Menu” to close the sub menu
after adjustment.
After adjusting the settings, press “Menu” to go back to the main
menu.
To exit, press “Menu” again. The OSD will be closed.
1.
2.
3.
4.
5.
6.
Using the On Screen Display (OSD)
If no button opera-
tion is made for 10
seconds, the OSD
will be closed auto-
matically.

Note
Sub Menu
Setting Main Menu