Ricoh PJ WX5350, Field Service Manual

Page: 126 / 155

• Recover the standby state by pressing the [POWER] key. When this action is taken, the original
status can also be recovered at the time of next starting.
Contents of display
When the service mode or the expert mode is assumed, the menu is added with the functions specified
below.
• Mode display
The present mode is displayed at the right side on the bottom of the menu screen.
• Addition of the adjusting functions to the menu top
The adjusting functions usually not displayed come to be displayed. Then, adjustments become
possible.
In the expert mode, the function for an expert menu can be selected.
In the service mode, the function for an expert menu or a service menu can be selected.
In addition, [Clear Panel Hours] is added to “Reset.”
• Modification of processing for existing functions
In the service mode, the items to be initialized are increased for the All Data Reset.
Additional functions (extract)
SETUP–EXPERT1 Tab
TEST PATTERN2
A test pattern can be set up or displayed. The setting, such as pattern, color, and level of the test
pattern to display can be changed over with PATTERN/RED/GREEN/BLUE/INVERT/LEVEL in the
test pattern items. After the test pattern setting is selected, the test pattern will be displayed, when
the DISPLAY is carried out.
Test pattern changeover and such operation are possible during test pattern display by means of a
remote control.
• Up/Down key: Test pattern changeover (Raster Cross hatch Gray Bars )
• Right/Left key: Level adjustment
• Menu: Red On/Off
• Aspect: Green On/Off
• PIC-Mute: Blue On/Off
• Enter: Invert On/Off
• EXIT: Test pattern cancel
5. Troubleshooting
124