Ricoh PJ WX4153N, Operating Instructions Manual

Page: 93 / 176

Item Default
Aspect
Select the aspect ratio of the image.
This function is not available when you select [USB Memory] or [Server]
as an input signal. When you select [Network PC] as an input signal, this
function is available only while you are projecting a computer's screen
using QuickProjection.
• Normal
Display in full screen without changing the input signal aspect ratio.
• 16:9
Display using 16:9 aspect ratio (1280 × 720 resolution).
• Full
Display using 1280 × 800 resolution.
• Native
Display the image without changing the resolution of the input
signal.
This setting is available when you select [Computer], [HDMI] (RGB
signals), or [Network PC] as an input signal.
• Zoom
Display the image width as the projection screen width while
maintaining the input signal aspect ratio.
Normal
Display Position
Move the image if the projected image is smaller or larger than the
projection screen size. You can move the image using the [ ], [ ], [ ],
and [ ] buttons.
This function is not available when you select [Network PC], [USB
Memory], or [Server] as an input signal.
-
Display/Sound Settings Menu
91