Ricoh PJ WX4153N, Operating Instructions Manual

Page: 44 / 176

Operations while Projecting Images
Adjusting the Volume of the Speaker
1. Press the [Volume] button.
The value bar appears at the bottom of the screen.
2. Adjust the volume using the [ ] and [ ] buttons.
CZE021
Press the [ ] button to decrease the volume. Press the [ ] button to increase the volume.
• You can also adjust the volume of the speaker using the [ ] and [ ] buttons on the control panel.
Switching the Sound Quality
You can select the sound quality of the audio that is playing.
1. Press the [Sound] button.
The sound quality selection screen appears at the bottom of the screen.
2. Select the sound quality using the [ ] and [ ] buttons.
• Standard ( ): Dialog and music are carefully balanced
• Narration ( ): This mode is suitable for listening to dialog
• Music ( ): This mode is suitable for listening to music
• This function applies to the built-in speaker on the projector only. If you use an external speaker,
you cannot change the sound quality with this function.
• The sound quality selection screen also appears when you press the [ ] or [ ] buttons on the
control panel or [Volume] button on the remote control.
2. Projecting an Image
42